Free shipping is offered on this product for the Continental US only. Please contact us for a shipping quote to other countries/locations.
A quick note about tube sizing (2.5" or 3") for our secondary pipes: The factory pipes on the Cayenne Turbo measure approx. 2.56" OD, and the factory midpipe on the S (non-Turbo) measures 2.36" OD. So, our 2.5" secondary pipes will flow better than the factory cat pipe, will fit better and will connect more easily to your factory midpipe. Our 3" version will flow better through the secondary and will provide a more open, "boomy" sound. However, you will maximize the benefits from the 3" version if you upgrade to our full 3" midpipe and rear exhaust. Whichever size you order, our secondary bypass pipes include adapters to transition from our 2.5" or 3" OD tube to the factory 2.56" OD midpipe (Turbo) or 2.36" (S non-Turbo) midpipe.
HHR is pleased to offer our newly-redesigned secondary cat bypass for the 955 (2003-2006) Cayenne. The stock Porsche Cayenne has 2 sets of (4 total) catalytic converters and this bypass removes the rear set of cats (you will still have one full set remaining on the car) to increase HP/TQ, sound levels by a marginal amount and provide incremental weight savings.
This new design provides much more clearance over the crossmember, and a more exact fit for the hangers.
We hand manufacture our own bypasses in Denver, Colorado. The tubing, flanges, and 4 adjustable hangers are made from 304 stainless steel with a matte brushed finish. We utilize a 2.5" tube which mates up to the factory down pipe, then to the factory 2.56" exhaust. Our flanges are 0.25 inch 304 stainless steel and were CAD designed to match factory specs and are precision water jet cut. Our bypass also incorporates 4 independently-adjustable stainless hangers, allowing adjustment as the exhaust moves over time. In addition, while the bypasses are considerably lighter than the factory cats, hangers are mandatory because the factory downpipes are flexible braided stainless steel and are not designed to be weight bearing. Adding bypasses without hangers will eventually damage the factory downpipes.
These bypass pipes will provide a power increase in the low-end and mid-range power band on a CTT and most importantly allow the turbos to spool significantly quicker. This product will provide significant power peak gains after an ECU tune. It is a noticeable difference and you will feel the difference the first time you drive with them installed. On the Cayenne S, the bypass provides immediate add-on power gains throughout the power band with peak gains of approx. 15hp to 17hp.
We believe this is a DIY project for anyone capable of operating a wrench. We provide detailed instructions, needed hardware and copper gaskets. This project is estimated at 120 minutes.
These pipes are fabricated and in-stock; plan for them to ship within 1-2 business days after cleared payment. Thanks! -Hank